FARGO electronic 410 - Manual (Page 145)

RESTRICTED USE ONLY Fargo Electronics, Inc.
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0) 145
Danger: You must unplug the power cable to the Card Printer to
ensure that all power is disconnected from the unit. Do not attempt any
work on the Card Printer’s interior unless you have first unplugged the
unit.
Cleaning the Printer's Exterior
Because the Printer ejects ink on to the card in a fine mist, ink smudges may eventually
appear on the Printer case. Refer to the following to clean the Printer's exterior.
• Do NOT clean the interior of the Printer. Keep all fluids away from the interior.
• To remove stains, smudges and/or dried ink from the exterior of the Printer, use a soft
cloth moistened with water. Do NOT use household cleaners or detergent.
Cleaning the Ink Cartridges
Automatically Cleaning Ink Cartridges
If the printed cards are missing lines or dots or if they contain ink streaks, the Ink Cartridges
need to be cleaned. Ink Cartridges are cleaned automatically using the following procedure:
Step Procedure
1 Open the Card Printer Driver.
2 Select the Print Supplies tab.
3 Select the Clean Ink Cartridge Nozzles button and follow the on-screen
directions.
Caution: Only clean the Ink Cartridges when it is necessary.
Unnecessary cleaning wastes ink and shortens the life of the Cartridge.
4 If the printed cards are still missing lines or dots after cleaning, the print
Cartridges and print Cartridge cradle may need to be cleaned manually.