FARGO electronic 410 - Manual (Page 160)

RESTRICTED USE ONLY Fargo Electronics, Inc.
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0) 160
Cleaning the interior Card Feed Rollers
This procedure needs to be completed when the Card Feed Rollers become dirty, and the
Rollers can no longer properly grip the card.
Step Procedure
1 Unplug the Printer.
2 Remove the Card Cartridge. See the previous page.
3 Remove the backing from the Fargo cleaning card and (with the sticky side down)
gently push it into the Card hopper Feed Path as shown below.
Continued on the next page