FARGO electronic 410 - Manual (Page 72)

RESTRICTED USE ONLY Fargo Electronics, Inc.
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0) 72
Technician Handbook for CardJet Card Printers (continued)
Topic Description
Un-
programmed
color Ink
Cartridge The Printer correctly detects and reports an un-programmed color Ink
Cartridge via the Ink LED and on-screen message. See Ink LED and
Error Messages in Section 2.
Un-
programmed
black Ink
Cartridge The Printer correctly detects and reports an un-programmed black Ink
Cartridge via ink LED and on-screen message. See Ink LED and Error
Messages in Section 2.
USB Interface
(Universal
Serial Bus;
electrical
structure) A 1.5MB/sec (12MB/sec) serial communication interface that can
support 127 separate devices consisting of 4 wires: power, ground,
data in and data out.
• Interface to PC and Power Supply: The system uses USB
interface to communicate to a PC and internal power supply.
Firmware initializes Fargo Controller Board.
• Controller: The Fargo Controller supports USB 1.1 support.
• Firmware: The Firmware is downloaded if the Printer has been
unpowered and then you power it up and connect the USB cable.
The Firmware is a part of Fargo PC Driver. To upgrade the
Firmware, the Operator has to update the Driver.
• System connections: The system has one USB upstream, type B
connector to a PC and 3 downstream channels, with internal
connections going to Fargo Controller, HP Print Engine and optional
encoding Board.
USB Hub Windows recognizes three (3) USB devices: the Print Engine, the
Fargo Controller and an on-Board USB hub (needed to split USB
upstream into three USB downstream channels).