FARGO electronic 410 - Manual (Page 70)

RESTRICTED USE ONLY Fargo Electronics, Inc.
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0) 70
Technician Handbook for CardJet Card Printers (continued)
Topic Description
Printer Start-up The device initialization and Firmware downloading occur when the
Printer start-up is initiated.
Ink Carriage
mechanism The device on a Printer that produces the image on the media.
Programmed
color Ink
Cartridge with a
Professional
product The Printer correctly detects and reports a color Ink Cartridge
programmed with a Professional product ID via Ink LED and on-screen
message. See Ink LED and Error Messages in Section 2.
Programmed
black Ink
Cartridge with a
Professional
product The Printer correctly detects and reports a black Ink Cartridge
programmed with a Professional product ID via Ink LED and on-screen
message. See Ink LED and Error Messages in Section 2.
Raising Cover
while printing You can raise the cover during the printing process and it will have no
effect on the printing process and the card print quality.
Replace empty
Ink Cartridges The Printer correctly detects and reports an empty color Ink Cartridge
via LED and on-screen message when the empty Cartridges are in
the Printer where the color Cartridge is empty.
Troubleshooting Instructions:
• Correctly install the non-empty black and color Ink Cartridges in the
CardJet Printer.
• Observe and record the Printer and PC screen responses when the
card is printed. The Ink LED should return to normal. The Printer
should resume printing the print job.
Continued on the next page