FARGO electronic 410 - Manual (Page 157)

RESTRICTED USE ONLY Fargo Electronics, Inc.
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0) 157
Replacing the Felt Ink Well (continued)
Step Procedure
4 Clean the Ink Well Tray with an alcohol pad from the Maintenance Kit, as shown
below.
5 Remove the backing off the new Ink Felt.
6 Place the new felt in the card path. Use a paper towel to press the felt down into
the card path.
7 Close the Cover.
This procedure is completed.