Replacing the felt ink well (continued) – FARGO electronic 410 User Manual
Page 156
Advertising
RESTRICTED USE ONLY
Fargo Electronics, Inc.
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0)
156
Replacing the Felt Ink Well (continued)
Step Procedure
3
Use the Ink Felt removal tool to firmly grasp the left corner of the Ink Felt.
Remove it by pulling the Felt up and to the right, as shown below
Caution: The old Ink Felt contains wet ink and will stain anything it
contacts. It is recommended that the old Ink Felt be placed in a small plastic bag
and then discarded.
Continued on the next page
Advertising