FARGO electronic 410 User Manual
Page 41
RESTRICTED USE ONLY
Fargo Electronics, Inc.
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0)
41
Printing the Test Print (after installing Ink and Card Cartridges)
Once the Ink and Card Cartridges are installed, a self-test should be performed to check for
proper operation of the Printer. (Note: The self-test function also requires that the Print
Driver is installed and the Printer's power and USB cables connected.)
Refer to the following to print a test print:
Step Procedure
1
Open the Printer Driver's Printer Properties Window.
2
Click on the Print Supplies tab. See Using the Print Supplies tab on page 129.
3
Click on the Test Printer button. See Selecting the Test Printer button on page
141.
4
From the Send Test window, click on the Send button to send a color test print
to the Printer. See Selecting the Test Printer button on page 141. (Note: After a
few seconds, the following test image will begin printing.)