FARGO electronic 410 User Manual
Page 52
RESTRICTED USE ONLY
Fargo Electronics, Inc.
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0)
52
Technician Handbook for CardJet Card Printers (continued)
Topic Description
Empty Ink
Cartridges (2)
(See Ink LED
and Error
Messages)
The Printer correctly detects and reports an empty Ink Cartridge via
LED and on-screen message when the empty Cartridges are in the
Printer where both Cartridges are empty.
Non-empty Ink
Cartridges
OR
Non-empty
color Ink
Cartridges
The Printer correctly detects non-empty Ink Cartridges when the
empty Cartridges are replaced in the Printer.
The printing continues on the print job that was halted by the detection
of the empty Ink Cartridges.
Empty black Ink
Cartridge (See
Ink LED and
Error
Messages)
The Printer correctly detects and reports an empty black Ink Cartridge
via LED and on-screen message when the empty Cartridges are in
the Printer where the black Cartridge is empty.
Empty black Ink
Cartridge
(replaced)
The Printer correctly detects non-empty Ink Cartridges when the
empty black Ink Cartridge is replaced in the Printer.
The printing continues on the print job that was halted by the detection
of the empty black Ink Cartridge.
Encoder Error
Handling (See
LED and Error
Messages)
The Firmware traps and reports encoding error responses via required
LED illumination and messages at the Driver Operator interface when
a print job and the Printer are configured with anomalous conditions
intended to trigger specific encoding errors.
The batch jobs are correctly resumed. After an error has been detected
and reported, an Encoding Retry option is provided for the
Operator via an on-screen button that correctly initiates an attempt to
re-encode the card when selected.
Continued on the next page