Furuno MARINE VHF RADIOTELEPHONE FM-3000 - Manual (Page 22)

13
5. DSC Operation
5.1 MMSI Code Programming
The 9-digit MMSI (Maritime Mobile Service Identity: DSC self
ID) code can be programmed at power ON.
Note: This function is not available when the MMSI code has
been programmed by the dealer. This code programming can
be performed only twice.
q Turn power OFF.
w While pushing [DSC/ENT], turn power ON to enter MMSI
code programming condition.
e After the display appears, release [DSC/ENT].
r Edit the specific MMSI code by rotating [CHANNEL].
• Push [CH/WX] or [SCAN] to move the cursor forward or back-
ward, respectively.
t Input the 9 digit codes, then push [DSC/ENT] to set the
code.
• Returns to the normal operation.
5.2 DSC Individual ID
A total of 40 DSC address IDs can be programmed and
named with up to 10 characters.
D D Programming Address ID/Group ID
q Push [DSC/ENT] to enter the DSC menu.
w Rotate [CHANNEL] to select “Set up,” push
[DSC/ENT].
e Rotate [CHANNEL] to select “Add ID,” push [DSC/ENT].
Set up
˘Add ID
Delete ID
Offset Time
Sel Item
POS Report
DTRS Set
˘Set up
Set MMSI
д23456789