Furuno MARINE VHF RADIOTELEPHONE FM-3000 - Manual (Page 29)

20
5.DSC Operation
5.6 Transmitting DSC Calls
5.6.1 Transmitting Individual call
The Individual call function allows you to transmit a DSC sig-
nal to a specific ship only.
q Push [DSC/ENT] to enter the DSC menu.
w Rotate [CHANNEL] to select “Individual,” push
[DSC/ENT].
e Rotate [CHANNEL] to select the desired pre-programmed
individual address or “Manual Input,” push
[DSC/ENT].
• The ID code for the Individual call can be set in advance. (p. 13)
• When “Manual Input” is selected, set the 9-digit ID code
(1st digit must not be ‘0’) for the individual you wish to call by
using [CHANNEL].
- Push [CH/WX] or [SCAN] for cursor movement.
- After 9-digit is input, push [DSC/ENT] to set the ID code.
r Rotate [CHANNEL] to select a desired intership channel
or “Manual Input,” push [DSC/ENT].
• When “Manual Input” is selected, rotate [CHANNEL] to se-
lect the desired channel other than Channel 70, push [DSC/ENT].
t Push [DSC/ENT] to transmit the Individual call.
• If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
To Call,
To Cancel
[other]
[DSC/ENT]
Individual
To Cancel
[other]
Ch70 is BUSY
Push [DSC/ENT] to transmit DSC call.
When Ch 70 is busy.
Sel Channel
69
˘08
77
Sel Address
Ricky
Manual Set
˘Tom
˘Individual
POS Input
Group
Sel Item