Dsc operation – Furuno MARINE VHF RADIOTELEPHONE FM-3000 User Manual
Page 38
29
5.DSC Operation
5.7.5 Receiving an All Ships call
While monitoring Channel 70 and an All Ships call is received:
➥Emergency alarm sounds when the category is ‘Distress’
or ‘Urgency’; 3 beeps sound for other categories.
➥“Received All ships” appears in the display.
➥Push [DSC/ENT] to change to the channel specified by the
calling station for voice communication; push other key to
ignore the All Ships call.
➥Monitor the channel for an announcement from the calling
vessel.
5.7.6 Receiving a Distress Relay call
While monitoring Channel 70 and a Distress Relay call is re-
ceived:
➥Emergency alarm sounds for 2 minutes.
• Push any key to stop the alarm.
➥“Received Distress RLY” appears in the display;
then, Channel 16 is automatically selected.
➥Monitor Channel 16 until the emergency communication
has been completed.
5.7.7 Receiving a Distress Relay acknowledgement
While monitoring Channel 70 and a Distress Relay acknowl-
edgement is received:
➥Emergency alarm sounds for 2 minutes.
• Push any key to stop the alarm.
➥“Received DTRS RLY ACK” appears in the display;
then, Channel 16 is automatically selected.
5.7.8 Receiving a Geographical Area call
While monitoring Channel 70 and a Geographical Area call
(for the area you are in) is received:
➥Emergency alarm or beeps sound depending on the re-
ceived category.
➥“Received Geographic” appears in the display.
➥Push [DSC/ENT] to change to the channel specified by the
calling station for voice communication; push other key to
ignore the Geographical Area call.
➥Monitor the selected channel for an announcement from
the calling station.
Note:
When no GPS receiver is connected or if there is a
problem with the connected receiver, all Geographical Area
calls are received, regardless of your position.
Routine
Geographic
< Tokyo CG
Received
< Osaka Bay
Routine
All Ships
Received