9 dsc set mode, Dsc operation – Furuno MARINE VHF RADIOTELEPHONE FM-3000 User Manual
Page 42
33
5.DSC Operation
5.9 DSC Set Mode
5.9.1 Add Address ID
(See p.13 for detail)
5.9.2 Delete Address ID
(See p.14 for detail)
5.9.3 Offset time
This item sets the offset time from the UTC (Universal Time
Coordinated) time.
q Push [DSC/ENT] to enter the DSC menu.
w Rotate [CHANNEL] to select “Set up,” push
[DSC/ENT].
e Rotate [CHANNEL] to select “Offset time,” push
[DSC/ENT].
r Set the offset time from the UTC (Universal Time Coordi-
nated) time.
• Edit the digit of offset time by using [CHANNEL].
- Push [CH/WX] or [SCAN] for cursor movement.
- Push [DSC/ENT] to set the offset time.
• Rotate [CHANNEL] to edit or delete “-,” when the cursor is on
the first digit.
t Push [DSC/ENT] to program and to exit the DSC menu.
Note:
The local time indication is not available when a GPS
receiver (sentence formatter ‘RMC’) is input, the transceiver’s
display indicates UTC time only.
Offset Time
00:00
Offset Time
-12:00
No offset time (default)
–12 hours
Set up
Add ID
Delete ID
˘Offset Time
Sel Item
RCV Calls
DTRS Set
˘Set up