Furuno MARINE VHF RADIOTELEPHONE FM-3000 - Manual (Page 63)

54
13. FM-3010 CONTROLLABLE MIC
e CHANNEL NUMBER READOUT
➥Indicates the selected operating channel number.
“A” appears when a simplex channel is selected. “b” ap-
pears when a receive only channel for a Canadian chan-
nel group is selected. (pgs. 5, 55)
➥In Set mode, indicates the selected condition. (pgs. 37,
61)
r VOLUME INDICATOR (p. 56)
Appears while audio output level is adjusted.
t SQUELCH INDICATOR (p. 56)
Appears while noise squelch level is adjusted.
y CHANNEL COMMENT INDICATOR
➥Channel comment appears (and scrolls) if programmed.
(pgs. 8, 623)
➥In Set mode, indicates or scrolls the selected Set mode
item. (pgs. 37, 61)
u ATTENUATOR INDICATOR (pgs. 7, 56)
Appears when the RF Attenuator is in use.
i SCRAMBLER INDICATOR (pgs. 9, 59)
Appears when an optional Voice scrambler is activated.
o SCAN INDICATOR (pgs. 12, 60)
➥“SCAN” appears during Normal scan.
➥“P SCAN” appears during Priority scan.
!0 PRIORITY CHANNEL INDICATOR
➥Indicates a priority channel during Priority scan or
Dual/Tri-watch. (pgs. 10, 12, 59, 60)
➥“IC” appears during Intercom mode. (pgs. 35, 62)
!1 DUAL/TRI WATCH INDICATOR (pgs. 10, 59)
“DUAL” appears during Dualwatch; “TRI” during Tri-watch.
!2 WEATHER CHANNEL INDICATOR (pgs. 6, 55)
➥“WX” appears when a weather channel is selected.
➥“WX ALT” appears when the Weather alert function is in
use; blinks when an alert tone is received.
!3 LOW POWER INDICATOR (pgs. 7, 56)
Appears when low power is selected.
!4 CALL CHANNEL INDICATOR (pgs. 5, 55)
Appears when call channel is selected.
!5 DUPLEX INDICATOR (pgs. 6, 55)
Appears when a duplex channel is selected.
!6 TAG CHANNEL INDICATOR (pgs. 12, 60)
Appears when a tag channel is selected.
!7 BUSY INDICATOR (pgs. 7, 56, 58)
Appears when receiving a signal or when the squelch
opens.
!8 TRANSMIT INDICATOR (pgs. 7, 56)
Appears while transmitting.