3 position and time programming, Dsc operation – Furuno MARINE VHF RADIOTELEPHONE FM-3000 User Manual
Page 24
15
5.DSC Operation
5.3 Position and Time Programming
A distress call should include the ship’s position and time. If
no GPS is connected, your position and UTC (Universal Time
Coordinated) time should be input manually. They are in-
cluded automatically when a GPS receiver (NMEA0183 ver.
2.0 or 3.01) is connected.
Note:
This manual programming is not available when a
GPS receiver (NMEA0183 ver. 2.0 or 3.01) is connected.
q Push [DSC/ENT] to enter the DSC menu.
w “POS Input” is selected automatically, push [DSC/ENT].
e Edit the digit of your latitude data by using [CHANNEL].
• Push [CH/WX] or [SCAN] to move the cursor forward or back-
ward, respectively.
• After editing latitude data, select “N”; North latitude or “S”; South
latitude.
• Push [HI/LO] to clear the position data.
r Edit the digit of your longitude data by using [CHANNEL].
• Push [CH/WX] or [SCAN] for cursor movement.
• After editing longitude data, select “E”; East longitude or “W”;
West longitude.
• Push [HI/LO] to clear the position data.
t Push [DSC/ENT] to set the position and advance to the
time setting condition.
• Push [16] (
) or [LO/DX] to abandon the setting and exit the
DSC menu.
y Edit the digit of the current UTC time by using [CHAN-
NEL].
• Push [CH/WX] or [SCAN] for cursor movement.
• Push [HI/LO] to clear the time data.
u Push [DSC/ENT] to set the time, and exit the DSC menu.
• Push [16] (
) or [LO/DX] to abandon the setting and exit the
DSC menu.
9
Input time
UTC :
Null˘[H/L]
9
Input POS
° .
-
° .
Null˘[H/L]