Furuno MARINE VHF RADIOTELEPHONE FM-3000 - Manual (Page 34)

25
5.DSC Operation
5.6.5 Transmitting Position Request call
Transmit a Position Request call when you want to know a
specific ship’s current position, etc.
q Push [DSC/ENT] to enter the DSC menu.
w Rotate [CHANNEL] to select “POS Request,” push
[DSC/ENT].
e Rotate [CHANNEL] to select the desired pre-programmed
individual address or “Manual Input,” push
[DSC/ENT].
• The ID code for the Position Request call can be set in advance.
(p. 13)
• When “Manual Input” is selected, set the 9-digit ID code
(1st digit must not be ‘0’) for the individual you wish to call by
using
[CHANNEL] .
- Push [CH/WX] or [SCAN] for cursor movement.
- After 9-digit is input, push
[DSC/ENT] to set the ID code.
r Push [DSC/ENT] to transmit the Position Request call.
t After the Position Request call has been transmitted, the
following indication is displayed.
y Push any key to exit the condition and return to the normal
operation.
POS REQ
Wait for ACK
Completed
To Call,
To Cancel
[other]
[DSC/ENT]
Sel Address
Ricky
Manual Set
˘Tom
Sel Item
Group
All ships
˘POS Request