FARGO electronic FARGO DTC 400 - Manual (Page 122)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.6) 5-11
Reviewing the Telnet Command Table (continued)
Telnet Command Command Purpose Command Format
save Save all current
settings as the stored
settings in the
permanent memory. save
load Take the settings from
the stored memory and
make them the current
settings. load
lpstat Display information
about the Printer
status.
This includes the status
and device response.
See the Printer web
page description.
lpstat
cancel Cancel a specific print
job from the print
queue. cancel 10
quit Stop the current Telnet
session. quit
Ethernet Web Pages – Standard Procedures
Reviewing Web page security
You can use the web pages from your Fargo Ethernet-connected Printer to view several
attributes about the Printer. Users must have administrative rights, and they must enter the
correct password to alter settings of the Printer. See the
Reviewing the Web Page Server
section.