Resetting to default settings, Resetting to default settings -48 – FARGO electronic FARGO DTC 400 User Manual
Page 159
RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.6)
5-48
Resetting to Default Settings
The Reboot page also allows the User to reboot the Ethernet Print Server into a default
settings mode. (Note: This simply restarts the Printer in a different state with the settings in
memory temporarily ignored.)
When the Default button is selected, the stored settings in the Printer’s memory are not
changed.
Step Procedure
1 Select
the
Administration link.
2
Log in as a root User (using the password) if you are so prompted. (Note:
Any change of setting will only be accepted after you have successfully
logged in.)
3 Select
the
Reboot link.
4 Select
the
Default button.
5 Click
the Yes button when prompted.
6
Wait for the Printer to reboot and display the home page.