Entering the tcp window size, Entering the tcp window size -21 – FARGO electronic FARGO DTC 400 User Manual
Page 132
RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.6)
5-21
Entering the TCP Window Size
Step Procedure
1 Select
the
Network link from any web page of the Printer.
2
Select the TCP window size from the drop-down menu, as shown below.
• This entry provides for entry of the TCP Window Size. It adjusts how
much data can be sent to the Printer at any one time.
• It is recommended that the default value of 2 MSS Packets be used to
ensure good compatibility with all client applications.
3
Click on the Submit button to save this setting.
4
Login as a root User if you are so prompted. (Note: Any change of setting
will only be accepted after you have successfully logged in.)
5
Reboot the Printer to effect this change.
procedure.