FARGO electronic FARGO DTC 400 - Manual (Page 95)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.6) 4-38
Resolving the Flipper Jam Error
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer. See the
Flipper Table Module Installation section (as needed).
Step Procedure
1 Review the following information.
• Symptom: The Flipper Table Module is jamming.
• Printer Error State: The Flipper Table has jammed while either aligning
itself or flipping a card.
• LCD Error Display: Flipper Jam
• Driver Monitor Error Display: Flipper Jam