FUJITSU M3099EX/EH - Manual (Page 135)

M3099EX/EH OEM Manual 4-5
BASIC
OPERATION
Table 4.1 Button functions (Continued)
Table 4.2 LEDs function
Document
Mode 1
Mode 2
Sets the document type (photograph or linedrawing).
Activates the setup mode. (See Appendix B)
Activates the maintenance mode. (*1)
Button name Function
Function Color Indicator
Power
Ready
Check
Lights to indicate the power is on.
Lights when the image scanner becomes
ready to read a document in the manual
mode and manual start mode. This
indicator turns off when the Start button is
pressed to read a document.
Lights if a equipment error occurs.
An error message is displayed on the LCD.
This indicator blinks if a document is
jammed in the ADF. This indicator turns
off when the jammed documents are
removed from the ADF and the upper
transport unit is closed.
Green
Green
Yellow
*1: See maintenance manual for details.
LCD display
The scanner is provided with simplex and duplex reading modes.
Simplex reading mode
The upper line (line 1) displays the current read mode for simplex
reading.
The lower line (line 2) displays the modes set and messages when the
buttons are pressed.