Document limitations, Areas that must not be perforated, Document limitations -4 – FUJITSU M3099EX/EH User Manual
Page 180: Areas that must not be perforated -4, 2 areas that must not be perforated -4
6-4
M3099EX/EH OEM Manual
Note:
• If carbonless papers are used, clean the roller twice as often as usual.
• Paper should be straightend to fit the condition below.
This section provides restrictions on document used for the scanner.
Areas that must not be perforated
Perforations are prohibited in the shaded area of Figure 6.2 to avoid
document size detection error or job separation sheet detection error
or jam.
Document
Limitations
Top of the paper
More than
30 mm
Less than
5 mm
Read surface
Feed direction
Read surface
Feed direction
Top of the paper
More than
30 mm
Less than
3 mm
Figure 6.2 Areas that must not be perforated
113
134
79
96
12
12
10
10
10
10
10
10
15
Front side
Reading surface
Document feeding direction
(Unit: mm)
Top of document
Bottom of document
Center of document
Reading
reference
position