FUJITSU M3099EX/EH - Manual (Page 223)

M3099EX/EH OEM Manual IN-1
INDEX
Command and Response 3-14
Command/response timing chart 3-93
Configuration 1-5
Configuration of the scanner 1-5
Connection specifications 3-1
Consumables
7-1
CONSUMABLES AND ACCESSORIES 7-1
Control circuit (MPU) 1-8
CONTROL command 3-20
Control Interface 3-1
Control unit 1-6
D
Data transfer 3-7
Device and Operator Actions for Equipment
Errors 5-4
Device and Operator Actions for Temporary
Errors 5-1
Document detection sensor 8-8
Document Limitations 6-4
Document Quality
6-2
Document Size 2-1, 6-1
DOCUMENT SPECIFICATION 6-1
Document type 6-2, 6-8
Document width detection sensor 8-7
Driver/receiver 3-3, 3-6
Drop-out Color
6-7
Drop-out color standards 6-7
Duplex (back-side) reading mode 4-20
Duplex (front-side) reading mode 4-15
Duplex circuit (back-side)
1-8
Duplex reading mode 4-7
E
Ejection sensor 8-9
Index
A
Abrasion counter 4-24, B-6
Accessories 7-2
Areas that must not be perforated
6-4
Arrangement of units 1-7
Automatic document feeder (ADF) 1-1, 1-7
B
Basic command/response sequence 3-14
BASIC OPERATION 4-1
Belt Replacement 4-36
Binarization and halftone function 2-1
Button specification and reading mode
setting 4-8
Buzzer functions 4-25
C
charge-coupled device (CCD) image sensors 1-1
CLEANING 8-1
Cleaning Locations and Frequencies 8-1
Cleaning the front-side lamp
8-2
Cleaning the glass surface 8-7
Cleaning the rollers 8-5
Cleaning the sensors 8-7
Cleaning the transport paths 8-6
Cleaning Tools 8-1
CLEAR command 3-19
Closing the Upper Transport Unit 4-2
Commands
3-17
Command/response correspondence 3-91