FUJITSU M3099EX/EH - Manual (Page 202)

M3099EX/EH OEM Manual A-6
A3.2 Print head position adjustment
You can adjust the print position in mainscanning direction manually. The
position you can set is limited as stated in section 1.
1 Open and remove the endorser cover at the
rear top corner of the scanner. Power of the
scanner will turn off, if the power is on at the
cover open.
2 Pinch the tab near the print head and slide it
to the position you want to print. The print
position is indicated by the indicater behind
the tab and the label attached on the rear
cover.
3 Close the endorser cover.
You can test the printing by the procedure in
section A2.6.
Endorser cover
Slide direction
Tab
or