FIC M296 - Manual (Page 119)

FIC M295 / M296 Disassembly Instruction
Parts Removal and Replacement Procedures
This section contains the field service-level removal/ replacement procedures for the notebook.
The notebook is designed for optimum modularity in order to make field replacement and
maintenance easy and efficient.
1. Removing the Battery Pack
The procedure for removing and replacing the battery pack is as follows:
1. The battery pack is located on the right side of the system unit.
2. To release the battery pack, locate the battery latch found underneath the unit.
3. Push the latch to release the lock and at the same time pull the battery pack out.
2. Removing the Keyboard
The internal keyboard is located above the system top unit and is fitted in without screws on the
top unit case. Follow the steps below on how to remove the keyboard and heat sink plate:
1. Remove keyboard cover by gently bending it from a gap between key “F6” and “F7” and
sliding it towards in front of you.
Keyboard Cover
Bend Up
Remove Keyboard Cover
2. Release keyboard cable by sliding the ZIF connector towards upward direction.
Release
keyboard
latch towards
d
Release Keyboard Latch
FIC M295 / M296 Disassembly Instruction
P - 1