FIC M296 - Manual (Page 141)

Troubleshooting and Repair
6.2.4 Run-time Error Messages
Table 6-4 BIOS Run-time Error Messages
Message Cause Action
I/O card parity interrupt at
address. Type (S)hut off NMI,
(R)eboot, other keys to continue Memory on a peripheral card
has failed. Check the memory cards
installed in the system.
Memory parity interrupt at
address. Type (S)hut off NMI,
(R)eboot, other keys to continue A memory chip(s) has failed. Check the memory on the
system board.
Unexpected HW interrupt
interrupt at address. Type
(R)eboot, other keys to continue Hardware problem. Not
displayed if the expected
interrupt handler is not enabled. Check all hardware in the
system.
Unexpected SW interrupt
interrupt at address. Type
(R)eboot, other keys to continue Error(s) in the software
program. Not displayed if the
extended interrupt handler is not
enabled. Turn the machine off and
then on again. If doesn’t
work, check the program.
Unexpected type 02 interrupt at
xxxxh. Type (S)hut off NMI,
(R)eboot, other keys to continue A parity error occurred, but the
source can not be determined. Turn the power off and then
on again.
FIC M295 / M296 Service Manual 6-9