FIC M296 - Manual (Page 26)

Outline of the M295 / M296
„
Language – Language for each country. Default setting as US language.
„
Boot Display Device – This field allows you to set the output boot display to
the LCD, CRT, or Both.
„ Primary Master – This field displays various parameters for the hard disk
drive. If type [Auto] is selected, the system automatically sets these parameters. If
type [User] is selected, Cylinders, Heads and Sectors can be edited.
„
Secondary Master – This field displays various parameters for the internal
CD-ROM or a DVD-ROM / Combo Drive.
„
System Memory, Extended Memory, CPU Type, CPU Speed and
BIOS Version – These fields are for information only as the BIOS automatically
detects related values.
P h o e n i x B I O S S e t u p U t i l i t y
Main
Internal HDD [FUJITSU MHR2020AT] Item Specific Help
Type: [Auto] User = you enter
LBA Format Parameters of hard-disk
Total Sectors: 39070080 Drive installed at this
Maximum Capacity: 20004MB connection.
Auto = autotypes
Multi-Sector Transfers: [16 Sectors] Hard-disk drive
LBA Mode Control: [Enabled] Installed here.
32 Bit I/O: [Disabled] 1-39 = you select
Transfer Mode: [Fast PIO 4] Pre-determined type of
Ultra DMA Mode: [Mode 2] Hard-disk drive
Install here.
CD-ROM = a CD-ROM drive
Is installed here.
ATAPI Removable =
Removable disk drive is
installed here.
F1 Help K‚ Select Item
−/+
Change Values F9 Setup Defaults
Esc Exit ÅÆ Select Menu Enter Select Sub-Menu F10 Save and Exit
Figure 1-13 Internal HDD/CD-ROM Sub-Menu
1-22 FIC M295 / M296 Service Manual