FIC M296 - Manual (Page 131)

FIC M295 / M296 Disassembly Instruction
15. Removing the Motherboard
The motherboard contains the major chipset and components needed to run the notebook.
Follow the steps below on how to remove the motherboard:.
1. Before removing the motherboard, you need first to disassemble the all basis unit modules
mentioned in the previous sections.
2. On the motherboard, there are ten hex bolts and four screws as showed below. Remove
these hex bolts and screws.
Six Hex Bolts at Rear Side of Notebook
USB Board
Cable
Hex bolts
Screws
Motherboard Screw Locations
3. When all screws and bolts are removed, you have to release the USB board cable from the
latches first. Then slowly detached the motherboard from the base unit casing.
FIC M295 / M296 Disassembly Instruction
P - 13