FIC M296 - Manual (Page 20)

Outline of the M295 / M296
PC Card Slot
The PCMCIA slot compartment houses one-card slots that support one PCMCIA Type II
cards. The notebook uses a CardBus PCMCIA controller that supports 5V and 3V 32-bit
CardBus and 16-bit PC cards. The PCMCIA slot compartment comes with sliding dummy
plastic with protection. Before you can directly insert the PC card, please remove it first.
To remove the inserted PC card, slightly push the button found on the right side of the PC slot
to release the eject button. Then push it again to release the Dummy Plastic Device. When the
PC card has moved out a space out of the slot, hold the edges of the card and slowly slide it
out.
o
For full functionality of PC cards, always ask for the latest driver from your PCMCIA
card dealer or download it from their Internet website.
o For network PC cards, you need first to stop the device under the PC Card
properties of Windows Control Panel. Otherwise, this may cause system hang or
system fatal error. Please use the LAN port of this notebook instead of using other
network PC card.
1-16 FIC M295 / M296 Service Manual