Removing the lcd panel – FIC M296 User Manual
Page 120
FIC M295 / M296 Disassembly Instruction
3.
Removing the LCD Panel
The procedure for removing the LCD Panel is as follows:
1. Follow the steps above in removing the keyboard cover and keyboard.
2. You will find the LCD panel connector with a cover attached to the system unit using two
screws. Remove the screws of the cover and pull out the coaxial connector.
Two screws
of LCD panel
connector
Two Screws of LCD Panel Connector
3. There are four screws securing both LCD hinges to the system unit. Two screws are at the
rear side of notebook, and the other two screws are at the under side. Remove the screws to
separate the LCD panel from the system unit.
Two
Screws
Two
Screws
Four Screws Securing the LCD Hinges
4. Slowly pullout the LCD panel from the system unit.
P -2
FIC M295 / M296 Disassembly Instruction