FIC M296 - Manual (Page 121)

FIC M295 / M296 Disassembly Instruction
5. To remove the LCD panel, you need to disassemble the LCD bezel and LCD cover back.
Remove four screws on the front bezel as shown in the figure below. Then, carefully
separate the front bezel cover from the LCD assembly.
Four Screws
Hinge
LCD Bezel Screw Locations
4. Removing the Palm Rest Cover and Glide Pad
The glide pad module is assembled underneath the palm rest cover. Follow the procedure below
on how to remove the module:
Glide Pad
Module
Palm Rest Cover
Glide Pad Location
1. Before removing the glide pad module, you need first to disassemble keyboard and palm
rest cover first.
FIC M295 / M296 Disassembly Instruction
P - 3