Removing the internal hard disk drive, Remove one screw securing hdd, Screw locations of the frame hdd bracket plate – FIC M296 User Manual
Page 123
FIC M295 / M296 Disassembly Instruction
5.
Removing the Internal Hard Disk Drive
The notebook provides a built-in hard disk for the primary IDE controller. The HDD is an
industry standard 2.5” IDE disk drive with a maximum height of 9.5mm, and can be upgraded
with another standard 2.5” HDD with a maximum height of 9.5mm.
1. Before removing the internal hard disk drive, you need first to disassemble keyboard and
palm rest cover first.
2. Find out the built-in hard disk secured with one screw at the upper right corner of the hard
disk. Remove this screw and carefully pull the hard disk module from the connector.
One Screws
Remove One Screw Securing HDD
3. Remove four screws are at the both sides of frame HDD bracket plate.
Screws
Screws
Screw Locations of the frame HDD bracket plate
FIC M295 / M296 Disassembly Instruction
P - 5