FIC M296 - Manual (Page 126)

FIC M295 / M296 Disassembly Instruction
8. Removing the System Top Cover
The procedure for removing the system top cover is as follows:
1. Before removing the system top case, you need first to disassemble keyboard, LCD panel,
palm rest cover, hard disk drive, and thermal module.
2. To remove the system top cover, you need to remove several screws. There are totally ten
screws found on the top case as indicated on the figure below. Remove them all.
Five
Screws
Five
Screws
System Top Cover Screw Locations
3. Slowly unsnap the top cover from the bottom case and gently release internal microphone
cable connected from the main board. Be careful for the IrDA lens will drop out.
9. Removing the CD-ROM Cover
To remove the CD-ROM cover then you have to follows below procedure.
1. Before removing the CD-ROM cover, you need first to disassemble keyboard, LCD panel,
palm rest cover, hard disk drive, thermal module, and system top cover.
P -8
FIC M295 / M296 Disassembly Instruction