FIC M296 - Manual (Page 164)

Notebook Specification
Charging Efficiency 100%
EVD1 14.0V
EVDF 12.0V
A.9 Inverter Specification
Input Voltage 5.0V
Start Voltage 1200Vrms (min)
Output Current 6mA (max)
Frequency 30~70KHz
Efficiency 75% (min)
Brightness Control Voltage 0.94~1.86V
A.10 DC/DC Specification
Controller MAX1631
Input Voltage 8 ~ 20V
Output Current 7A (5V) / 4.5A (3.3V) / 120mA (12V)
Frequency 200KHz
Support Mode OVP / OCP
A.11 Charger Specification
LITHIUM ION (LI-ION) BATTERY PACK
Max. Temperature 60 degrees
Controller Mitsubishi 3886X
Input Voltage 18.5 ~ 20V
Charger Entry Temperature 0 – 50 degrees
Max. Timer 300 minutes
Trickle Charger Detect 0 < V < 3V / cell
Output Current (system off) 1.6A (Min) / 1.7A (Typ) / 1.8A (Max)
Output Current (system on) constant power
Trickle Charger Current 120mA
Ripple & Noise 500mV
Efficiency 90%
A.12 Mechanical Specification
Unit Dimensions
(W x D x H) in millimeters
308 x 268 x 39.9 mm (Front), 42.9 mm (Rear)
Unit Weight Approximately 3Kg (6.6 lbs) with 14.1” LCD System with
HDD, FDD, CD-Rom & One Li-Ion Battery Pack
A-8
FIC M295 / M296 Service Manual