9 miscellaneous, 1 power button, 2 security – FIC M296 User Manual

Page 94: 10 cmos setup utility, 11 definitions of terms, Software functional overview

Advertising
background image

Software Functional Overview

3.9

Miscellaneous

3.9.1 Power Button

The system may have different action upon pressing the Power Button when the system is in
the different state.

System Power State

Action for Pressing Power Button

Full-on Power

Off

Stand by

Power Off

STR

Resume from STR

STD

Resume from STD

SOff/MOff Power

On

3.9.2 Security

The user may enter up to 8 standard text characters for a password. The password includes
two levels. The higher priority is the Supervisor Password. The lower priority is the User
Password. The Supervisor Password can access all the system resource, while the User
Password may not access the floppy disk when it is protected by Supervisor Password. Also,
the User Password may not access the floppy disk when the Supervisor Password protects it.

When the security function is enabled, the system will request the user to enter password
during the following situation:

• Power On → The system will prompt the user to enter the password before booting

the OS. If the user key in the wrong password for 3 times, then the system will halt.


• Resume → The system will prompt the user to enter password while resuming from

STR or STD mode. If the user keys in the wrong password for 3 times, the system
will not resume and should return to Suspend mode.

• Entering CMOS Setup → The system will prompt the user to enter the password

before entering the CMOS Setup. If the user keys in the wrong password for 3 times,
then the system will halt.

3.10 CMOS Setup Utility

The Setup utility is used to configure the system. The Setup contains the information
regarding the hardware for boot purpose. The changed settings will take effect after the
system rebooted. Refer to Chapter 1 on running BIOS Setup Program for more detailed
information.

3.11 Definitions of Terms

10Base-T (Ethernet) - A networking standard that supports data transfer rates up to

10Mbps (10 megabits per second).

100Base-T (Fast Ethernet) - A relatively new networking standard that supports data

transfer rates up to 100Mbps.

ACPI - Advanced Configuration and Power Management Interface, a power

management specification developed by Intel, Microsoft, and Toshiba.

CardBus - The 32-bit version of the PCMCIA PC Card standard. In addition to


3-44

FIC M295 / M296 Service Manual

Advertising
This manual is related to the following products: