Frymaster LOV BIELA14 - Manual (Page 24)

1-17
Buttons and LED’s
Manual – This button is used to toggle between auto and manual filtration mode. A corresponding
LED is lit when in Manual mode. When pressed, a message will be sent to all vats, indicating the
mode has changed.
The following buttons are inoperable in auto mode:
Select - This button is used to scroll through available vats, choosing one to be manually filtered.
Drain – This button is used to open and close the drain on the vat indicated on the display. It’s
embedded LED indicates the following activity:
Blink: Actuator is moving or awaiting a response from the AIF board.
Constant Illumination: Drain open.
No Illumination: Drain closed.
Return – This button is used to open and close the return valve on the vat indicated on the display.
When pressed and held, it also turns on and off the pump. It’s embedded LED indicates the following
activity:
Blink: Actuator is moving or awaiting a response from the AIF board.
Constant Illumination: Return valve open.
No Illumination: Return valve closed.
1.11.1 Manually Draining, Refilling or Filtering using the MIB board
Press the manual/auto switch to set to manual.
The LED on the manual key will illuminate and
a vat number is displayed (see Figure 8).
Figure 8
Press the vat selector switch to change vats (see
Figure 9).
Figure 9
Pressing the drain or the return switch
illuminates and activates the drain or return
valve for the vat indicated. Pressing and holding
the return switch while the return is open
activates the filter motor and pump (see Figure
10).
Pressing the manual/auto switch will return to
automatic mode.
Figure 10