Formatting a card – Fostex MR-8 User Manual

Page 25

Advertising
background image

25

MR-8 Owner’s Manual

Formatting a card

By formatting a card, all recorded data on the card are erased and the card returns to the
initial condition, follow the procedure shown below to format the card.

1) Turn off the MR-8.

2) Set the card you are going to format to the slot.

3) Turn on the MR-8.

The display shows the startup screen, then the
song is loaded.

4) Press the [MENU] key to enter the menu mode.

The display changes to the menu selection
screen, in which "

System

" is initially

highlighted.

5) While "System" is highlighted, press the [ENTER]

key.

The display now shows the System menu
selection screen, in which "

Card Format

" is

initially highlighted.

6) While "Card Format" is highlighted, press the

[ENTER] key.

The display now shows the screen for
confirmation before the card format.
In this screen, "

Delete All Songs!

" and "

Can't

Undo!

" are shown for warning, as well as

"

Yes-> RECORD+YES key

" and "

No-> NO key

"

alternately flash.

<Note>

Once you start formatting, you cannot stop it on
the way.
To cancel formatting, press the [CURSOR ] key
when the confirmation screen is shown.

7) Press the [CURSOR ] key while holding down the

[RECORD] key.

The MR-8 starts formatting. When completed,
"

Completed!

" is shown on the display.

8) Press the [ENTER] key.

The screen exits the "

Card Format

" menu, and

automatically change to the "Select Song"
menu for creating a new song (01).

Then, select the song mode and enter the song
name to create a new song to the formatted
card, following the same procedure as
described on page 21.

Advertising