FARGO electronic S000256 - Manual (Page 153)

RESTRICTED USE ONLY FARGO Electronics, Inc.
Setting up the Printer Driver
Once the appropriate printer driver has been installed, you will need to set the driver up with
the proper print options. Although each of the included printer drivers displays the print
options in a slightly different format, the basic options are the same. For this reason, this
section lists and describes each of the printer driver options in alphabetical order, rather than
displaying them in the order in which they appear within any one of the printer drivers.
Most applications allow you to change these same printer driver options from their own Print
screens. This means that you do not have to go back to the main printer setup window each
time you want to change a setting or option in the printer driver. These applications will
usually give you the same choices and options, but in a slightly altered format.
To open the printer driver setup window, please refer to the following steps for your specific
operating system:
Windows 95/98
Step Procedure
1 Click the Start button, point to Settings, and select Printers.
2 Click on the card printer icon with the right mouse button, and select Properties.
Windows NT
Step Procedure
1 Click the Start button, point to Settings, and select Printers.
2 Click on the card printer icon with the right mouse button, and select Document
Defaults.
3 Click on the Advanced tab of the Document Settings window.
Persona
® C25 Card Printer User Guide (Rev. 4.0)
153