FARGO electronic S000256 - Manual (Page 67)

RESTRICTED USE ONLY FARGO Electronics, Inc.
Reviewing the Self Test Output Samples (RPI Potentiometer)
The output is too light, the last gray fill box does not appear. The RP1 potentiometer should
be turned Counter-Clockwise to increase the darkness level.
v1
.0
.1
The output is too dark. The RP1 potentiometer should be turned Clockwise to reduce
intensity.
v1
.0
.1
The output is correct. The last gray fill intensity is barely visible.
v1
.0
.1
Persona
® C25 Card Printer User Guide (Rev. 4.0)
67