Furuno FR-2115-B - Manual

i
Installation Manual
MARINE RADAR FR-2115-B/FR-2125-B
SAFETY INSTRUCTIONS................... i
EQUIPMENT LISTS ...........................iii
SYSTEM CONFIGURATION ..............vi
1. MOUNTING
1.1 Antenna Unit.................................... 1-1
1.2 Processor Unit................................. 1-6
1.3 Monitor............................................. 1-9
1.4 Control Unit.................................... 1-11
2. WIRING
2.1 Antenna Unit.................................... 2-1
2.2 Processor Unit................................. 2-5
2.3 Monitor............................................. 2-8
2.4 Control Unit.................................... 2-10
2.5 External Equipment ....................... 2-11
2.6 AC Power Specification of
Processor Unit............................... 2-13
3. INITIALIZATION AND
ADJUSTMENT
3.1 Tuning Initialization.......................... 3-1
3.2 Accessing Menus for Initialization and
Adjustment ....................................... 3-1
3.3 Adjusting Video Signal Level........... 3-1
3.4 Heading Alignment .......................... 3-2
3.5 Adjusting Sweep Timing .................. 3-3
3.6 Suppressing Main Bang .................. 3-3
3.7 Confirming Magnetron Heater
Voltage ............................................ 3-4
3.8 Initial Setting Menus ........................ 3-5
4. OPTIONAL EQUIPMENT
4.1 Gyro Converter GC-8 ...................... 4-1
4.2 ARP Board ARP-26......................... 4-7
4.3 RP Board RP-26.............................. 4-9
4.4 Performance Monitor PM-30 ......... 4-13
4.5 Alarm Kit ........................................ 4-14
4.6 AC-DC Conversion Kit................... 4-15
PACKING LISTS .............................A-1
OUTLINE DRAWINGS....................D-1
INTERCONNECTION DIAGRAM ...S-1
SCHEMATIC DIAGRAMS ...............S-2