Furuno FR-2125V - Manual (Page 119)

6-9
2. Press the [6] key to select method of mark entry; CURSOR, L/L or OWN SHIP POSN.
3. Press the [ENTER] key.
4. Press the [NAV MENU] key.
Entering marks/lines at CURSOR or OWN SHIP POSITION
1. Select CURSOR or OWN SHIP POSITION following “Selecting method of entry” on
the previous page. Press the [MARK] key to display the ENTER MARK menu.
01 11 21 LINE CHANGE
02 12 22 MARK CANCEL
03 13
04 14
05 15
06 16 NAV LINE
07 17 COAST LINE
08 X 18 CONTOUR LINE
09 19 PROHIBITED AREAS
10 20 CABLE
CANCEL ENTER MARK: CANCEL KEY
[ENTER MARK]
MARK NO. 01
Figure 6-10 ENTER MARK menu (cursor, own ship)
2. Enter mark number to select desired mark, followed by the [ENTER] key. On the OWN
SHIP POSN mode, selected mark is entered at own ship’s position.
3. On the CURSOR mode, operate the trackball to place the cursor on the position de-
sired for the mark.
4. Press the [ENTER] key.
5. To escape the mark entry mode, press the [CANCEL] key.
Entering marks by latitude and longitude
1. Select L/L POSN following “Selecting method of entry” on the previous page. Press the
[MARK] key.