Furuno FR-2125V - Manual (Page 127)

6-17
6.9.3 Replaying data
1. Press [NAV MENU], [6].
2. If REPLAY is not in reverse video, press the [6] key again.
3. Press the [ENTER] key.
[REPLAY CARD 1]
1 [VIDEO PLOTTER]
2 XXX
3 XXX
4 XXX
5 XXX
6 XXX
7 XXX
8 XXX
9 XXX
0 [REPLAY CARD 2]
Figure 6-17 REPLAY CARD menu
4. Press numeral key to select file to replay. You can go to the next page by pressing the
[0] key.
5. Press the [ENTER] key.
6.10 Initial Settings
An item on the PLOTTER DISP SELECT menu can be deleted through the VIDEO PLOT-
TER INITIAL SETTING menu.
1. Press the [NAV MENU] key.
2. Press the [0] key twice to display the VIDEO PLOTTER INITIAL SETTING menu.
[VIDEO PLOTTER INITIAL SETTING]
1 [VIDEO PLOTTER 2]
2 DANGER HIGHLIGHT ON/OFF
3 COASTLINE
ON/OFF
4 LAND DENSITY ON/OFF
5 PLACE NAME ON/OFF
6 MARK ON/OFF
7 OWN SHIP PLOT ON/OFF
8 TARGET PLOT ON/OFF
9 CONTOUR LINE ON/OFF
0 GRID ON/OFF
Figure 6-18 VIDEO PLOTTER INITIAL SETTING menu
3. Press appropriate numeral key to turn item on or off.
4. Press the [ENTER] key.
5. Repeat 3 and 4.
Note: If Video Plotter fails to provide intended functions, turn ON the required functions on
this menu.