Furuno FR-2125V - Manual (Page 62)

1-51
1.38 Adjusting Brilliance of Screen Data
You can adjust relative brilliance levels of various marks and alphanumeric readouts dis-
played on the screen by the steps below:
1. Press the [RADAR MENU] key to show the FUNCTIONS 1 menu.
2. Press the [0] and [9] keys to show the BRILLIANCE 1 menu. To display the BRIL-
LIANCE 2 menu, further press the [0] key.
3. Select a desired menu item by pressing the corresponding numeric key. As an ex-
ample, press [8] in the BRILLIANCE 1 menu if you want to change the brilliance of
target trails.
4. Further press the same numeric key as you pressed in step 3 above to select or high-
light a desired brilliance level.
5. Press the [ENTER] key to conclude your selection followed by the [RADAR MENU] key
to close the menu.
RADAR MENU
[0]
[9] [BRILLIANCE (1)]
1 [FUNCTIONS (2)]
2 RINGS BRILL
OFF/DIM/M1/M2/BRT
3 EBL BRILL DIM/M1/M2/BRT
4 VRM BRILL DIM/M1/M2/BRT
5 +CURSOR BRILL OFF/DIM/M1/M2/BRT
6 CHAR BRILL DIM/M1/M2/BRT
7 MARK BRIL DIM/M1/M2/BRT
8 TRAIL BRILL DIM/M1/M2/BRT
9 HL BRILL DIM/M/BRT
0 [BRILLIANCE (2)]
[BRILLIANCE (2)]
1 [BRILLIANCE (1)]
2 PLOT BRILL
OFF/DIM/M1/M2/BRT
3 L/L GRID BRILL DIM/M1/M2/BRT
4 CHART BRILL DIM/M1/M2/BRT
5 SYMBOLS BRILL DIM/M1/M2/BRT
[0]
[FUNCTIONS (1)]
1 TARGET TRAILS
2 TARGET ALARM
(1 or 2)
3 ORIGIN MARK (1 to 10)
4 INDEX LINES
5 ZOOM
6 PULSE WIDTH
7 INT REJECT
8 ARPA
9 VIDEO PLOT
0 [FUNCTIONS (2)]
[FUNCTIONS (2)]
1 [FUNCTIONS (1)]
2 BKGD COLOR
BLK (GRN CHAR)/
BLK (RED CHAR)/
BLU (ECHO AREA)
BLU/
BRT BLU
3 ECHO STRETCH OFF/1/2/3
4 ECHO AVERAGE OFF/1/2/3
5 ECHO COLOR YEL/GRN/COLOR
6 SHIP SPEED LOG/NAVMAN
MAN = 00.0KT
(STW/SOG)
7 SET, DRIFT OFF/MAN
SET = 000.0 °
DRIFT=00.0KT
8 INDEX LINES NO.2 VRM/MAN
MAN = 00.00NM
9 [BRILLIANCE (1)]
0 [FUNCTIONS (3)]
Figure 1-49 Sequence for selection of brilliance options