Furuno FR-2125V - Manual (Page 46)

1-35
1.27.1 Displaying, erasing the index lines
1. Press [RADAR MENU], [4] key to display or erase the index lines.
[FUNCTIONS (1)]
1 TARGET TRAILS
2 TARGET ALARM (1 or 2)
3 ORIGIN MARK (1 to 10)
4 INDEX LINES
5 ZOOM
6 PULSE WIDTH
7 INT REJECT
8 ARPA
9 VIDEO PLOT
0 [FUNCTIONS (2)]
Figure 1-37 FUNCTIONS 1 menu
2. Orient the index lines in a desired direction with the EBL rotary control. The azimuth of
the index lines appear at the bottom of the screen.
1.27.2 Adjusting index line intervals
1. Press [RADAR MENU], [0] to show the FUNCTIONS 2 menu.
[FUNCTIONS (2)]
1 [FUNCTIONS (1)]
2 BKGD COLOR
BLK(GRN CHAR)/
BLK(RED CHAR)/
BLU (ECHO AREA)
BLU/
BRT BLU
3 ECHO STRETCH OFF/1/2/3
4 ECHO AVERAGE OFF/1/2/3
5 ECHO COLOR YEL/GRN/COLOR
6 SHIP SPEED LOG/NAV/MAN
MAN = 00.0KT
(STW/SOG)
7 SET, DRIFT OFF/MAN
SET = 000.0
°
DRIFT = 00.0KT
8 INDEX LINES NO. 2 VRM/MAN
MAN = 00.00SM
9 [BRILLIANCE (1)]
0 [FUNCTIONS (3)]
Figure 1-38 FUNCTIONS 2 menu
2. Press the [8] key to select menu item 8 INDEX LINES.
3. Press the [8] key to select (or highlight) NO. 2 VRM or MAN (manual) option.
4. Press the [ENTER] key to conclude your selection.
5. If you selected MAN in step 3 above, “MAN = 00.00NM” appears at the bottom of the
FUNCTIONS 2 menu. Enter a desired line interval (without omitting leading zeroes) by
hitting numeric keys and then press the [ENTER] key. There are choices of 2, 3 and 6
index lines but the number of lines visible on the screen may be less than 6 depending
on the line intervals.