FUJITSU FIJITSU Image Scanner fi-5750C - Manual (Page 157)

CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
9.1 Additional memory board
10 SCANNER SPECIFICATIONS
Appendix
Chapter 9 OPTIONS (Continued from the previous page)
9.1 Additional memory board
When this option is installed on the scanner, it improves scanning performance at higher resolution setting. (For example, scanning operation
will not be interrupted at both sides colored 401dpi or higher resolution .)
1. Remove the screws on the rear side of the scanner, and remove the covers.
2. Insert the memory board into the slot and push it down so that the board is fixed with claws.
3. Secure the screws to fix the covers.
The following memory boards are recommendable for using with fi-5750C Color Image Scanner.
Manufacturer Model Memory Size
Micron Technology MT4LSDT1664HG-13E 128MB
Micron Technology MT8LSDT3264HG-13E 256MB
HINT
If you confirm the additional memory board is completely insatalled, you check the scanner memory value of [standard information] on
[Device information] panel in [Software operation panel].
All Rights Reserved, Copyright (C) PFU LIMITED 2003