FUJITSU FIJITSU Image Scanner fi-5750C - Manual (Page 67)

•
CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
2.6 How to use the Scanner Driver (Continued from the previous page)
Dropout Color
This option excludes selected color (the three primary colors of light i.e. green, red, blue) from scanned images. For example, if the document
contains black text in a red frame and when the red color is selected, the scanner reads only the text and eliminate (drop out) the red frame.
Reverse
Colors of scanned images are reversed.
Background
Specifies the Background color. Enabled only for the scanners equipped with Background color switching mechanisms.
Power saving
This option specifies the waiting time before the scanner switches to the Power save mode.
Double Feed Detection
Detects Double-feeds (phenomena that two or more sheets are accidentally fed). You can set conditions for detecting Double-feeds so that
the scanner should stop and display error messages. Double feeds are scanned by the differences in document lengths or thicknesses.
1 ··· 10 | 11 ··· 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29
All Rights Reserved, Copyright (C) PFU LIMITED 2003