FUJITSU FIJITSU Image Scanner fi-5750C - Manual (Page 47)

•
CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
2.6 How to use the Scanner Driver (Continued from the previous page)
Image Mode
Specifies the image type for the scanned documents.
● Black & White
Documents are scanned in binary (black and white).
● Halftone
Documents are scanned through halftone processing in black and white.
● Grayscale
Documents are scanned with 256 gradations of black and white.
● Color
Documents are scanned colored. For this mode, you can select 24 bit Color, 256Color or 8 Color. [Scan] button
Starts scanning documents with the current settings.
[Preview] button
Documents are scanned preliminary before the actual scanning.
You can confirm the image of the documents in the preview window.
[Close] button
Saves the current settings and closes this window.
[Reset] button
Used to undo changes of settings.
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 ··· 29
All Rights Reserved, Copyright (C) PFU LIMITED 2003