FUJITSU FIJITSU Image Scanner fi-5750C - Manual (Page 21)

CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
1.1 Names and functions of parts
1.2 Functions of the operator panel
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
1.1 NAMES AND FUNCTIONS OF PARTS (Continued from the previous page)
No. Name Function
7 Operator Panel This panel consists of a Function No. display, four buttons and a LED.
8 ADF Paper Chute For scanning documents with the Flat bed, place the document here..
9 Shipping Lock Used to fix the carrier unit. It is securing the carrier during transportation.
10 ADF buttons Press this button to open the ADF.
11 ADF (Automatic Document Feeder)
It transports a document to the reading position automatically. According to needs, this unit can
be set in three directions by turning and sliding it.
12 Stacker Scanned documents are ejected from the ADF onto this tray. It is possible to change the height.
1 | 2 | 3 | 4
All Rights Reserved, Copyright (C) PFU LIMITED 2003