FUJITSU FIJITSU Image Scanner fi-5750C - Manual (Page 61)

•
CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
2.6 How to use the Scanner Driver (Continued from the previous page)
Contrast
Sets the contrast between light and shadow of the scanned image. Specify the contrast as a number within the range of 1 (low [soft]) to 255
(high [sharp]). Increasing this value makes the contrast sharper.
Scan Type
Selects the scanning method.
ADF (Front Side)
Scans only the front sides of documents.
ADF (Back Side)
Scans only back sides of documents.
ADF (Duplex)
Scans both front and the back sides of documents. When this option is selected, the both sides of documents are scanned simultaneously.
This option can be used only for the models that support duplex scanning.
Flatbed
Scans documents placed on the Flatbed.
1 ··· 10 | 11 ··· 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29
All Rights Reserved, Copyright (C) PFU LIMITED 2003