Freescale Semiconductor Windows Embedded CE 6.0/Windows CE 5.0 i.MX31 PDK 1.4 - Manual (Page 12)

About the Boards
Debug Board
10
i.MX31 PDK 1.4 Quick Start Guide
Table 1.3 Debug Board SW4 Switch
Switch Setting Effect
SW4-1 UART Port Select ON Selects serial port UART (DCE) CON4
SW4-8 Power Enable ON Power is supplied to all three boards.
OFF Power is only supplied to the Debug
board.
Table 1.4 Boot Mode Setting (SW5–SW10)
Boot Mode
Device SW5 Boot4
SW6 Boot3
SW7 SW8 SW9 SW10
UART/USB
bootloader X 0 0 0 0 0
8-bit NAND Flash
(2KB page) Ext X 1 0 0 0 0
3StackQS_WinCE.book Page 10 Sunday, September 28, 2008 1:58 PM