Freescale Semiconductor Windows Embedded CE 6.0/Windows CE 5.0 i.MX31 PDK 1.4 - Manual (Page 36)

Using the Demo Image
Running the Demo Applications
34
i.MX31 PDK 1.4 Quick Start Guide
Using a USB Memory Stick
You must have a USB mini AB-to-A female connector, for connecting the USB memory
stick to the 3-Stack board.
To use the USB memory stick with the 3-Stack board, follow these steps:
1. Make sure the 3-Stack is powered and running the Windows CE 5.0 or Windows
Embedded CE 6.0 demo image.
2. Connect the adapter to J18 USB Host connector on the Personality board, and connect
the USB memory stick to the adapter.
3. Click on the "My Device" icon in the Windows CE 5.0 or Windows Embedded CE 6.0
desktop.
A Windows Explorer window opens, displaying the Hard Disk icon (Figure 4.9).
Figure 4.9 Viewing the Hard Disk Icon
4. Double-click the "Hard Disk" icon.
Running the Demo Applications
The Windows CE 5.0 or Windows Embedded CE 6.0 image pre-loaded in the 3-Stack
board has two applications:
• The TV-Out application allows you to use a TV as a display
• The Rotate application to switch the display from portrait to landscape
3StackQS_WinCE.book Page 34 Sunday, September 28, 2008 1:58 PM